Upper transmission mount

A little catch-up.  I've been too busy to update the blog for a while, but things have been happening!

Since we decided to mount the motor-transmission directly to the frame (no rubber mounts) both of the transmission mounts had to be remade.  I showed the lower transmission mount in an entry back in September(!), but we hadn't finalized the upper transmission mount design way back then.  It's done now and installed.  Here's the design as it looked on the computer.

The piece of angle with 2 holes in it mates up with the transmission, and the single hole on the vertical piece mates up with the mounting hole in the frame.  Simple.  Here's the final piece, painted and in place.

The drive train is now complete.